Teltonika FM2200

Teltonika forum related to GPS trackers produced by Teltonika
Post Reply
Joanna
Posts: 76
Joined: Mon Apr 19, 2021 9:59 am

Teltonika FM2200

Post by Joanna »

Image

Configuration of Teltonika FM2200 tracker for Free Server: :!:

Image

1. Install an active SIM card in Teltonika FM2200 tracker

Image

2. Download application
FM22.rar
(1.93 MiB) Downloaded 933 times

3. Install the application on Your PC

Image

4. Connect Teltonika FM2200 tracker with Your PC using USB cable (in some of devices you need to remove a cover to get to the USB port)
Image
5. Power-Up Teltonika FM2200 device using suplied power cable.
6. Run config app on Your PC
7. In the configurator panel click Connect and then Advanced Configuration

Image

8. Expand GSM tab and go to GPRS, then in server setings set domain 85.25.213.72 port 5027

Image

9. Go to Records tab, set the values as : open link Active Data Link Timeout 3600 i Server Response Timeout 300

Image

10. Next enter the APN of the SIM card operator example APN list link: https://www.teltonika.org/apn-list/
If You can't find your network APN in example list please contact Your SIM operator

Image

11. Next go to Operator List and enter mobile network operator code

Image

12. Set recommended values of Data Acquisition Modes
Minium value for vehicle in Home network connection is:
On Stop - 300 sec
Moving - 60 sec
This means that device will download one point every 60 sec, every 1 km when faster or if the steering angle is less than 33.
The same Settings must be made for Roaming and Other unknown network.
Using lower values can overload the server and disable the tracker.


Image

13. Optionally, in the SMS tab, You can enter the phone number of the SIM card for wireless configuration of the tracker, then set your login and password to send SMS commands to the Teltonika FM2200 tracker.

Image
Image

14. Save Teltonika FM2200 tracker settings

Image

15. Teltonika FM2200 tracker is ready to use.

Next step - Free Server Settings
Post Reply